Multi-Cyclone Filter

Filtration Systems - Bead & Sand Filters - Sieves - Vortex etc › Multi-Cyclone Filter › Multi-Cyclone Filter

Multi-Cyclone Filter The Multi-Cyclone is a filter that is capable of filtering out up to 80% of the incoming sediment from the pump. It is ideally situated after the pump on a gravity fed system or before a Bead, Sand or Cartridge Filter on a Skimmer line. It needs a minimum flow rate of 300 lph up to a maximum of 30,000 lph. ~ Reduced filter maintenance ~ No Filter media to clean and replace ~ An excellent water polisher ~ Extends the life of your existing filter ~ Cuts water consumption ~ Reduces frequency of backwashing ~ Works on the basis of centrifugal water filtration ~ No moving parts Centrifugal filtration - 1. Incoming water enters 16 hydro cyclones tangentially, generating a strong centrifugal effect. 2. The sediment is spun out to the hydro cyclone’s wall, and then spirals down to the sediment bowl. 3. The filtered water migrates towards the centre of the hydro cyclone where the flow reverses and spirals upwards through the outlet. 4. Accumulation of sediment can be visibly monitored through the Multi-Cyclone’s clear sediment bowl. 5. The Multi-Cyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the Multi-Cyclone. ***FREE DELIVERY***Plus 5% OFF The Price Shown For BKC Members Product Variants FT-9202 - Stand £ 40.84 FT-9200 - Filter £ 245.10 FT-9205 - Filter & Stand Set £ 275.73